The Bustamante Lab | UC Berkeley | UniPR
Assemblies: Lower optical train

 

Lower optical train

Description Assembly of optical parts that includes 2 objective lenses and their mounts and 2 retarder plates
Type Assembly
Drawing
Drawing (4.8 Kb)
Pictures
Picture
(A) Lower optical train showing prism box, spacers, and lower periscope.
Drill a 3/16" hole in two of the Prism Box Standoff Spacers so that an allen wrench can be inserted through the holes to tighten the screws which lock the Light Lever Pickoff Tubes in place.

(A) Lower optical train showing prism box, spacers, and lower periscope.
Picture
(B) Remove the position detector lower periscope.
Note that the Light-Lever-Standoff-Spacer is asymmetric and that it is installed so the 5/16" hole for the periscope is closer to the Prism Box than to the Optical Rail. This section will be covered with tape to protect the optics from dirt and splashed buffer.

(B) Remove the position detector lower periscope.
Picture
(C) Wrap with 1" black tape (Thorlabs T137-1.0) and cut two holes with scalpel (see description).
Larger hole is for the lower periscope, and the smaller hole is for the wrench to access the screw in the pick-off assembly for adjustment.

(C) Wrap with 1" black tape (Thorlabs T137-1.0) and cut two holes with scalpel (see description).
Picture
(D) Reinstall position detector lower periscope.

(D) Reinstall position detector lower periscope.
Parents
Children · Prism Box
· Prism Box
· position detector lower periscope
· position detector lower periscope
· Objective centering assembly
· Optical rail and objective sliding mount
· Beam block left hand
· Beam block right hand
Parts
NameManufacturerVendorRequiredStockCost
Objective lensUPLSAPO 60XWOlympus America2$7430.00
Tapeblack 1" x 60 yds.Thorlabs1$7.87
Estimated cost: $14867.87
 

List all the parts for "Lower optical train"

last changed 2008/07/12 07:19

Printable version