Pictures : Search results

For more results click below:

Search for:	Advanced search
AZ title:	A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Category:	Fluidics \| Tools \| boards \| instrument assembly

Tweezers LAB

Pictures: Search results

Picture	Title	Category	Assembly
(C) Wrap with 1" black tape (Thorlabs T137-1.0) and cut two holes with scalpel (see description). Larger hole is for the lower periscope, and the smaller hole is for the wrench to access the screw in the pick-off assembly for adjustment.	(C) Wrap with 1" black tape (Thorlabs T137-1.0) and cut two holes with scalpel (see description).	instrument assembly	Lower optical train
(D) Reinstall position detector lower periscope.	(D) Reinstall position detector lower periscope.	instrument assembly	Lower optical train
Magnetic Lens Mount magnetic ring is held by 3 rare-earth magnets which are glued into depressions (holes marked "F") in the Hexagon Base	Magnetic Lens Mount	instrument assembly	CCD camera assembly
Dowel pins made from 1/8" Brass tube Use same brass tube as in wiggler, cut to 1/2" length	Dowel pins made from 1/8" Brass tube	instrument assembly
Press pins into holes using guide to keep them straight Metal guide made from 1/4" thick scrap aluminum. Drill with #30 drill	Press pins into holes using guide to keep them straight	instrument assembly
Motor Cable Clamp where motor cable harness enters instrument head	Motor Cable Clamp	instrument assembly	motor cable harness
Motor cable harness	Motor cable harness	instrument assembly	motor cable harness
Rear side of the main control board Three capacitors are Panasonic ECJ-3VB1E334K	Rear side of the main control board	instrument assembly	main control board
B) Laser Mount wiring Wire connections to Laser Mount PC Board and on DB-9 connector. On the connector wire pins as follows: Pin1=brown Pin2=red Pin3=orange Pin4=yellow Pin5=green Pin6=blue (same end as pin1) Pin7=violet Pin8=black Pin9=white (same end as pin5)	B) Laser Mount wiring	instrument assembly	Laser assembly
C) Diode laser (Lumics) and laser base Laser, base and circuit board with wires attached Schottky diode protects Laser diode from static	C) Diode laser (Lumics) and laser base	instrument assembly	Laser assembly
A) Base with circuit board	A) Base with circuit board	instrument assembly	Laser assembly
D) Unwind the optical fibre from the box	D) Unwind the optical fibre from the box	instrument assembly	Laser assembly
E) Fix the laser into the laser base	E) Fix the laser into the laser base	instrument assembly	Laser assembly
F) Wind the optical fibre inside the laser base clockwise	F) Wind the optical fibre inside the laser base clockwise	instrument assembly	Laser assembly
G) Feed the FC termination inside FC termination goes through the hole on the laser base front, then it is fed through the feedthru plate into the adapter from ThorLabs with cap.	G) Feed the FC termination inside	instrument assembly	Laser assembly
H) Fix the feedthru plate	H) Fix the feedthru plate	instrument assembly	Laser assembly
I) Place foam inside to keep the optical fibre in place	I) Place foam inside to keep the optical fibre in place	instrument assembly	Laser assembly
J) Ground soldering iron to the laser base	J) Ground soldering iron to the laser base	instrument assembly	Laser assembly
K) Solder the laser to the base	K) Solder the laser to the base	instrument assembly	Laser assembly
L) Cover the laser base and label with serial number	L) Cover the laser base and label with serial number	instrument assembly	Laser assembly
optical_layout	optical_layout	instrument assembly